OptoLAB, Laboratory for Optolelectronics
Faculty of Technical Sciences, University of Novi Sad
OptoLAB, Laboratory for Optolelectronics
Education at OptoLAB
OptoLAB, Laboratory for Optolelectronics
Research at OptoLAB
OptoLAB, Laboratory for Optolelectronics
Equipment at OptoLAB

Online sources

The selected online courses/material on optoelectronics, photonics and optical communications.

read more

Recommended literature

Great source of literature about optoelectronics, photonics and optical communications.

read more


Project base

Archive of student projects, seminars, bachelor and master thesis on the topic of optoelectronics.

read more


Youtube Channel

OptoLAB youtube channel with demonstration videos of project, course and excerises.

read more

jb     Jovan Bajić, PhD

    ●  Teaching Assistant

    ● +381214852538

    ●  This email address is being protected from spambots. You need JavaScript enabled to view it.

    ●  Fiber-optic sensors, Optoelectronics,

        Color Research 


Jovan S. Bajić was born in Sremska Mitrovica, in 1986. He received the B.Sc. and M.Sc. degrees in electrical engineering from the Faculty of Technical Sciences (FTS), University of Novi Sad (UNS), Serbia in 2009 and 2010, respectively. Jovan has been employed at FTS, UNS since January 2011 and in 2013 he became a Teaching Assistant at the Chair of Electronics where he participated in taking courses on Sensors and Actuators, Application of Sensors and Actuators, Optoelectronics, Applied Optoelectronics and Electronics and Optoelectronics. He is author and co-author of several papers published in international journals, as well as at national and international conferences. In 2015 he recived PhD degree in Electrical and Computer Engineering from UNS, Novi Sad. Currently, Jovan is Assistant Professor at FTS, UNS. 

Main activities and research 

  • Teaching and research in the field of Sensors and Actuators, Electronics and Optoelektronics, Applied Optoelectroncs and Application of the Sensors and Actuators
  • Development of various analog and digital electronics and optoelectronics circuits
  • Research and development of various measurement and sensing systems based on the light intensity, phase and spectral change using fiber-optic sensing techniques.

Honors and Awards

  • Department of Power, Electronics and Telecommunication Engeneering annual award for young researcher with most reaserch papers published in 2014.
  • Chair of Electronics annual award for young associate for the results achieved in the teaching and research in 2013.
  • 3rd place in the international competition HARD & SOFT 2011, Faculty of Technical Sciences, Novi Sad, Serbia, team leader.
  • 2nd place at the national competition in robotics - EUROBOT 2011, Novi Sad, Serbia, team member.
  • Award: "Dr. Vladan Desnica", Faculty of Technical Sciences, Novi Sad, Serbia award for best student of microcomputer electronics in 2010 year.
  • Award: "Mihajlo Pupin" Matica Srpska, Novi Sad, Serbia award for master thesis: "Fiber optic sensors based on change of light intensity in opical fiber " (second prize) (2010).
  • 1st place at the national competition in robotics - EUROBOT 2010, Novi Sad, Serbia team member
  • 3rd place in the international competition HARD & SOFT 2010, Suecava, Romania, team member
  • 4th place in the international competition HARD & SOFT 2009 Faculty of Technical Sciences, Novi Sad, Serbia, team member
  • Several rewards for success achieved during the

Selected research papers:

  1. Jovan S. Bajić, Marko Z. Marković, Ana Joža, Dejan D. Vasić, Toša Ninkov: „Design calibration and characterization of a robust low-cost fiber-optic 2D deflection sensor“, Sensors and Actuators A: Physical, 2017, Vol. 267, pp. 278-286, ISSN: 0924-4247.
  2. Ana V. Joža, Jovan S. Bajić, Lazo M. Manojlović, Vladimir A. Milosavljević, Branislav D. Batinić, Nikola M. Laković, Miloš B. Živanov: „Design considerations and performance analysis of dual photodetector system for reliable laser wavelength and power monitoring“, Sensors and Actuators A: Physical, 2017, Vol. 261, pp. 14-23, ISSN: 0924-4247.
  3. Jovan S. Bajić, Dragan Z. Stupar, Bojan M. Dakić, Milos B. Živanov, Laszlo F. Nagy, “An absolute rotary position sensor based on cylindrical coordinate color space transformation”, Sensors and Actuators A: Physical, Vol. 213, pp. 27-34, 2014, ISSN 0924-4247.
  4. Emil V. Jelenković, Milan S. Kovačević, Dragan Z. Stupar, Jovan S. Bajić, Miloš P. Slankamenac, Milojko Kovačević, Suet To, “N-channel polysilicon thin film transistors as gamma-ray detectors”, Measurement Science and Technology, Vol. 24, pp. 1-5, 2013, ISSN 0957-0233.
  5. Jovan S. Bajić, Dragan Z. Stupar, Lazo M. Manojlović, Miloš P. Slankamenac, Miloš B. Živanov, “A simple, low-cost, high-sensitivity fiber-optic tilt sensor”, Sensors and Actuators A: Physical, Vol. 185, pp. 33-38, 2012, ISSN 0924-4247.
  6. Milan Kovačević, Svetislav Savović, Aleksandar Djordjevich, Jovan S. Bajić, Dragan Z. Stupar, Milojko Kovačević, Saša Simić, “Measurements of growth and decay of radiation induced attenuation during the irradiation and recovery of plastic optical fibres”, Optics & Laser Technology, Vol. 47, pp. 148–151, 2013, ISSN 0030-3992.
  7. Dragan Z. Stupar, Jovan S. Bajić, Lazo M. Manojlović, Miloš P. Slankamenac, Ana Joža, Miloš B. Živanov, “Wearable Low-Cost System for Human Joint Movements Monitoring Based on Fiber-Optic Curvature Sensor”, IEEE Sensors Journal, Vol. 12, pp. 3424 - 3431, 2012, ISSN 1530-437X.

Latest on OptoLAB

2024 04 07 125008 DIY CNC Machine - PCB Milling
This project presents a DIY CNC machine project used for PCB milling that was master thesis project of our students.

read more
front img

High performance electronic circuits
Lectures and excercises from the course of High performance electronic circuits - Login required!
read more

Big Sky Compare NEWS: STMicroelectronics makes a 18K Big Sky Sensor
Big Sky is a custom 18K camera to shoot high-resolution video for the MSG Sphere in Las Vegas. Sensors is so big that only four can be fabbed on a single 300mm wafer

read more
front MultiZone TOF Sensor Demo - VL53L7CX
 This project presents a simple demo for ST's VL53L7CX multizone time of flight sensor implemented using LightRanger 11 click board.

read more
2023 10 05 173530 Simple BCG Heart Rate Monitoring System
Project illustrates simple electronic system based on non-invasive method of Ballistocardiography or BCG for measuring and analyzing small ballistic impact forces caused by the contraction of the heart muscle.
read more
lightning NEWS: MIT’s System Combines Light and Electrons for Faster Computing
MIT researchers introduce “Lightning”, a reconfigurable photonic-electronic smartNIC to serve real-time machine-learning inference requests.

read more
optolab biosens NEWS: A master's thesis proposal - OptoLAB and Biosens Institute
A proposal for a master's thesis in cooperation with OptoLAB and Biosens Institute.

read more
photonika2023 NEWS: RTS report on the Photonica 2023 conference
Short report on IX International School and Conference on Photonics.

read more

Gallery - Conference Photonica 2023
Photos from IX International School and Conference on Photonics held from August 28 to September 1, 2023. at the Serbian Academy of Sciences and Arts, Belgrade.  
read more

front Simple DIY Educational Servo Motor
Simple educational servo motor built by students for course of Application of Sensors and Actuators.

read more
schobot NEWS: Team SCHOBot qualified for Bosch Future Mobility Challenge
Our students qualified for the final stage of the Bosch Future Mobility Challenge competition.

read more
front Mikromedia 5 for Tiva C and LVGL GUI library
Demo project for Mikromedia 5 for Tiva C Series development board based on open source Light and Versatile Graphics librariy.

read more
front TCD1304AP CCD Sensor
 This project presents a simple readout demo for TCD1304AP CCD sensor with 3648 light sensitive pixels.

read more
front ConnectEVE (FT800) as 3D printer display
 This project illustrates how to add simple color touch UI solution on 3D printer based on FTDI FT800/EVE graphics controller.

read more
front DIY Servo Motor
This project illustrates how you can simply build your own servo motor.

read more
mikroe NEWS: Student intership at Mikroelektronika
Check out the expirience of students from the internship done within the Mikroelektronika company.

read more
front OV7670 Camera Demo
Demo project for OmniVision OV7670 camera module done using DMCI interface and STemWin GUI library.

read more
front Ramps 1.4 Butterfly - 3D printer controller board
Ramps Butterfly is modular 3D printer controller board that uses Click boards™ by Mikroelektronika.
read more
front OptoLAB mini: Simple Development for PIC32 & STM32
OptoLAB mini is a small development board with ConnectEVE display intended for MINI boards with PIC32 & STM32 MCUs by Mikroelektronika.

read more
frontxc Using MPLAB X IDE and XC32 Compilers with mikroBootloader
This project contains information how to use MPLAB X IDE and XC32 Compilers from Michrochip with preloaded USB-HID bootloader from Mikroelektronika.

read more
front site Fiber Optic Curvature Sensors - FOCS
Simple fiber-optic sensor for measurement of amplitude and direction of bending deformations.

read more
idek front

Pulse and digital electronics
Lectures and excercises from the course of Pulse and digital electronics - Login required!
read more

front Mikromedia 7 Capacitive and TouchGFX GUI library
Demo project fot Mikromedia 7 Capacitive development board for STM32F7 mcu based on TouchGFX GUI librariy.

read more

Self Balancing Platform
Simple self balancing platform with MPU - 6050, AX - 12 servo motors and 3D printable parts
read more


Soft Robotic Gripper
Simple, three fingers, soft robotic gripper with 3D printable mold and improvised air compressor
read more

Recent Articles



Connect with us

Kucica2    Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia

Telefon2    Telephone: +381 (0)21 485 2538

Fax2     Fax: +381 (0)21 485 0572

Mejl2     Email: optolabuns@gmail.com

© - Faculty of Technical Sciences, Novi Sad, 2016